Description
The flagship Crestron® PRO3 is an enterprise-class control system with an enhanced feature set including a front panel color LCD display, built-in control card expansion slots, and a dedicated Control Subnet port. Featuring the 3-Series® control engine, the PRO3 forms the core of any modern networked home or commercial building, managing and integrating all the disparate technologies throughout your facility to make life easier, greener, more productive, and more enjoyable.
Technical Specifications
Control Engine
Crestron® 3-Series®; real-time, preemptive multi-threaded/multitasking kernel; Transaction-Safe Extended FAT file system; supports up to 10 simultaneously running programs
Memory
SDRAM 1 GB
Flash 4 GB
Memory Card supports SD and SDHC cards up to 32 GB
External Storage supports USB mass storage devices up to 1 TB
Communications
Ethernet 10/100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, industry-standard TCP/IP stack, UDP/IP, CIP, DHCP, SSL, TLS, IEEE 802.1X, SNMP, BACnet™/IP[2], IPv4 or IPv6, Active Directory authentication, IIS v.6.0 Web Server, SMTP e-mail client
Control Subnet 10/100/1000 Mbps Ethernet, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP server, DNS Server, port forwarding, Isolation Mode
Cresnet® Cresnet master mode
USB Supports USB mass storage class devices via rear panel USB 2.0 host port, supports computer console via front panel USB 2.0 device port
RS-232/422/485 For 2-way device control and monitoring, all ports support RS-232 up to 115.2k baud with software handshaking, two ports also support hardware handshaking, RS-422, and RS-485
IR/Serial Supports 1-way device control via infrared up to 1.2 MHz or serial TTL/RS-232 (0-5 Volts) up to 115.2k baud
Connectors & Card Slots
S1 – S3 (3) 3-Series control card expansion slots
COM 1 – 2 (2) 5-pin 3.5mm detachable terminal blocks;
Bidirectional RS-232/422/485 ports[3];
Up to 115.2k baud; hardware and software handshaking support
COM 3 – 6 (4) 3-pin 3.5mm detachable terminal blocks;
Bidirectional RS-232 ports[3];
Up to 115.2k baud; software handshaking support
IR – SERIAL OUTPUT 1 – 8 (2) 8-pin 3.5mm detachable terminal block comprising (8) IR/Serial output ports;
IR output up to 1.2 MHz;
1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud
RELAY OUTPUT 1 – 8 (2) 8-pin 3.5mm detachable terminal blocks comprising (8) normally open, isolated relays;
Rated 1 Amp, 30 Volts AC/DC;
MOV arc suppression across contacts
LAN (1) 8-wire RJ45 jack;
10Base-T/100Base-TX/1000Base-T Ethernet port[3];
Connects to the customer’s LAN
CONTROL SUBNET (1) 8-wire RJ45 jack;
10Base-T/100Base-TX/1000Base-T Ethernet port[3];
Provides a dedicated local network for Crestron devices
USB (1) USB Type A female;
USB 2.0 port for storage devices
MEMORY (1) SD memory card slot;
Accepts one SD or SDHC card up to 32 GB for memory expansion
I/O 1 – 8 (1) 9-pin 3.5mm detachable terminal block comprising (8) “Versiport” digital input/output or analog input ports (referenced to GND) [3];
Digital Input: Rated for 0-24 Volts DC, input impedance 20k Ohms, logic threshold >3.125V low/0 and <1.875V high/1;
Digital Output: 250mA sink from maximum 24 Volts DC, catch diodes for use with "real world" loads;
Analog Input: Rated for 0-10 Volts DC, protected to 24 Volts DC maximum, input impedance 21k Ohms with pull-up resistor disabled;
Programmable 5 Volts, 2k Ohms pull-up resistor per pin
NET (1) 4-pin 3.5mm detachable terminal block;
Cresnet master port, outputs power to Cresnet devices[3];
See "Power Requirements" for additional specifications
100-240V~2.4A 50/60Hz (1) IEC 60320 C14 main power inlet;
Mates with removable power cord, included
G (1) 6-32 screw, chassis ground lug
COMPUTER (front) (1) USB Type B female;
USB 2.0 computer console port (6 ft cable included);
For setup only
LCD Display
Display Type TFT active matrix color LCD
Size 2.8 inch (72 mm) diagonal
Resolution 320 x 240 pixels
Functions Displays configuration menus, control port activity, and other system information
Controls & Indicators
PWR (1) Green LED, indicates operating power supplied from AC line
NET (1) Amber LED, indicates communication with the Cresnet system
MSG (1) Red LED, indicates control system has generated an error message
HW-R (1) Recessed pushbutton for hardware reset
SW-R (1) Recessed pushbutton for software reset
CNPS FAULT (1) Red LED and (1) pushbutton, LED indicates an excessive Cresnet load detected at the NET port, pushbutton resets the fault indication
SLOT 1 – 3 (3) Green LEDs, indicate control cards are inserted in the corresponding slots
Nav Pad (1) 5-way navigation pad for menu navigation and parameter adjustment
HOME (1) pushbutton, returns to the home menu
BACK (1) pushbutton, steps menu back one level
LAN (rear) (2) Bi-color green/amber LEDs, left LED indicates Ethernet link status and connection speed, right LED indicates Ethernet activity
CONTROL SUBNET (rear) (2) Bi-color green/amber LEDs, left LED indicates Ethernet link status and connection speed, right LED indicates Ethernet activity
Power Requirements
Main Power 2.4 Amps @ 100-240 Volts AC, 50/60 Hz
Available Cresnet Power 75 Watts (3.125 Amps @ 24 Volts DC)
Environmental
Temperature 41° to 113°F (5° to 45°C)
Humidity 10% to 90% RH (non-condensing)
Heat Dissipation 45 BTU/Hr with no Cresnet devices, no control cards;
71 BTU/Hr with full Cresnet load, no control cards;
See individual control card spec sheets for additional specifications
Enclosure
Chassis Metal, black finish, vented top and sides
Faceplate Extruded metal, black finish, polycarbonate label overlay
Mounting Freestanding or 2U 19-inch rack-mountable (adhesive feet and rack ears included)
Dimensions
Height 3.47 in (89 mm) without feet
Width 17.28 in (439 mm), 19.00 in (483 mm) with rack ears
Depth 10.13 in (258 mm)
Weight
5.0 lb (2.3 kg)
Reviews
There are no reviews yet.