DIN-4DIMFLV4: DIN Rail 0-10V Dimmer Module ~

Description
Technical Specifications
Reviews (0)

Description

The DIN-4DIMFLV4 is a 4-channel lighting control module designed to dim 0-10 Volt drivers and ballasts. A single model supports both 120 and 220 to 240 Volt applications. The DIN-4DIMFLV4 may also be used for switching of non-dimmable lighting loads up to 5 amps[1] and 1/2 HP motors.

Override Input
An override input is provided to allow an external contact closure to momentarily override the control system program and set each channel output to its override preset level. Levels can be adjusted and saved locally from the front panel or remotely via software.

DIN Rail Installation
The DIN-4DIMFLV4 is designed to snap onto a standard DIN rail for installation in a wall mount enclosure. Wiring connections are made using screw terminals positioned along the top and bottom, clearly accessible from the front for easy installation and servicing. All setup controls and indicators are positioned on the center front panel. When installed in an enclosure utilizing 45 mm cutouts, the DIN-4DIMFLV4’s front panel stays accessible while the connections are concealed.

Cresnet®
The DIN-4DIMFLV4 communicates with Crestron® control systems such as the DIN-AP2 or DIN-AP3 Automation Processors via the Cresnet control network. Use one of the unit’s two Cresnet ports to daisy-chain several DIN Rail Series automation control modules.

Technical Specifications

Dimmer Channels
4

Maximum Per Channel
5 Amps @ 120 to 240 Volts AC, 50/60 Hz;
600 Watts @ 120 Volts AC;
1150 Watts @ 230 Volts AC;
1200 Watts @ 240 Volts AC, 0.5 HP;
16 Amps Resistive

Module Total
20 Amps @ 120 to 240 Volts AC, 50/60 Hz;
2400 Watts @ 120 Volts AC;
4600 Watts @ 230 Volts AC;
4800 Watts @ 240 Volts AC

Dim Load Types
0-10 Volt fluorescent ballast or LED driver (4-wire);
Maximum of 30 dimmable ballasts/drivers

Switch Load Types
[1] Incandescent, magnetic low-voltage, electronic low-voltage, neon/cold cathode, fluorescent, motors

Connections
OUTPUT 1 – 4 (2) 4-pin 3.5mm detachable terminal blocks comprising (4) isolated dimming control outputs;
Voltage Control Range: 0 to 10 Volts DC;
Maximum Sink Current: 60mA per channel;
Output Resolution: 1024 levels (10 bit)
1 – 4 (4) sets of (2) captive screw terminals;
Isolated Class 1 SPST relay switch circuits 1 – 4;
Relay Rating: 5 Amps maximum per channel;
Maximum Wire Size: 12 AWG (2.5 mm²)
NET (2) 4-pin 3.5mm detachable terminal blocks, paralleled;
Cresnet® slave port
OVERRIDE (2) 2-pin 3.5mm detachable terminal blocks, paralleled;
Sensing input for external low-voltage contact closure;
Activates override mode when a closure is present;
Minimum Closure Rating: 10mA (per module) at 24 Volts

Controls & Indicators
1 – 4 (4) Red LEDs and (4) miniature pushbuttons for status indication and local control of each channel
NET ID (2) 7-Segment green LED digits and (2) miniature pushbuttons for setting Cresnet ID; digits also display output levels
SETUP (1) Red LED and (1) recessed miniature pushbutton for enabling setup mode and touch-settable ID
OVR (1) Red LED and (1) miniature pushbutton for enabling override mode and saving override presets
PWR (1) Green LED, illuminates when DC power is applied to the NET port
NET (1) Yellow LED, indicates communication with the control processor
RESET (1) Recessed miniature pushbutton, resets internal processor

Enclosure
Light gray polycarbonate housing with polycarbonate label overlay, UL94 V-0 rated, 35mm DIN EN 60715 rail mount, DIN 43880 form factor for enclosures with 45mm front panel cutout, occupies 9 DIN module spaces (162mm)

Power Requirements
Cresnet Power Usage 4.2 Watts (0.18 Amps) @ 24 Volts DC

Environmental
Temperature 32° to 104° F (0° to 40° C)
Humidity 10% to 90% RH (non-condensing)
Heat Dissipation 17 BTU/hr

Dimensions
Height 3.71 in (95 mm)
Width 6.26 in (159 mm)
Depth 2.35 in (60 mm)

Weight
9.2 oz (260 g)

Standards & Certifications
UL Listed
CE
CEC Title 24 2013 Compliant

Reviews

There are no reviews yet.